09/14 DIY Projects

DIY Marble Hexagon Coasters

DIY Hexagon Marble Coasters

A coaster DIY??  Does the universe really need another one???  Ok but what if I need a new set of coasters and I want them to be hexagon and black marble and I can’t find any to buy?  Then we DIY, and also mention that they’d be great gifts to further justify that making them is a good idea.  The holidays are soon.

black (I used one block/coaster) and white clay (used less than one block total)
-rolling pin
parchment paper
-lid of hexagon box (at Joann for $1)
X-ACTO knife
adhesive felt

I laid down a piece of parchment paper to work on since the clay can get seriously stuck to the working surface.  This is definitely known from past experience.  Marbling clay might also take some practice and getting used to, but this is generally how I do it.

clayI softened and mashed up a block of black clay so that it looked like a piece of you know what, then randomly stuck on small pieces of white clay.  Next, I twisted the clay all over to help striate the white clay throughout before rolling it into a ball and smashing it down.  Using the rolling pin, I rolled out the clay until it was just big enough for the hexagon lid to be placed on top of.

Originally I had thought I’d roll out all the clay into one giant sheet and cut each coaster out from it, but the clay marbling process is so much more manageable if done one at a time, so that’s what I recommend.  Also, twisting and mashing too much will make the clay look muddy and gray, which is cool if you want a more subtle and less contrasted look, but I wanted the white marbling to be pretty crisp, so I kept the clay handling to a minimum.

cutI used an X-ACTO knife to trace around the hexagon lid and cut out the shape from the clay.  After removing all the excess clay, I cut the parchment paper around the coaster to be transferred onto a baking sheet.  Once the sheet was loaded with all the coasters on top of parchment paper, I popped them into the oven at 275F for about 25 minutes.  My sheet had a total of seven coasters, and I agree, that’s a weird number of coasters to have.

feltOnce completely cooled, I lightly sanded down any rough edges before I traced each coaster onto the back of adhesive felt and cut it out, erring on the side of cutting slightly smaller than what was traced.  Peeled off the backing, stuck it on the bottom of the coasters, and they’re ready…

Hexagon Marble Coasters DIY

…for my favorite game of….

Black Marble Hexagon Coasters DIY

…how many ways can I arrange these coasters?

DIY - Black Marble Hexagon CoastersI like this game.

DIY Black Marble Hexagon Coasters

This would definitely work with other colors too, and shapes, absolutely.  If I were to do it again, I’d want to try making thicker, round ones.  What say you?  And have you ever DIY’ed coasters before?

46 comments on “DIY Marble Hexagon Coasters”

  1. Amazing idea! I want to try with different jewel tone colors and do a quatrefoil shape. Brilliant! Thanks for the wonderful idea!!

  2. These are awesome Amy! I love the marbled look. This is a stupid/clay newbie question but when you bake the clay in the oven, does it get hard enough to not be brittle and break? I’d be so worried that I’d set a cup down too hard and the coaster would crack!

    1. Thanks, Caitlin! Not a stupid question. I thought the clay would dry to a porcelain feel, but it feels a lot more like plastic. They are for sure never going to shatter

  3. You mentioned trying it thicker or with a rounder pattern. My husband and I tackled this one this weekend. We used red and gold with a Moroccan style shape. (We also made them HUGE since I drink tea out of “cups” that are just bowls with handles.) They turned out wonderful! Thanks for the tutorial!!

    If you make them thicker or larger, you’ll need two blocks (or 4 oz.) of clay for each coaster. I only used 1/4 block for each accent color. We ran out of clay, so we only made two coasters. We’re planning on making more next weekend so we’ll have plenty when we have company next. I’ll send you pictures of you want me to. Thanks again!! You’ve gained a lifelong reader and subscriber.

  4. Hey Amy!
    I am going to try these next weekend but i was wondering, do I need to varnish them with anything in order for them to be heat or water resistant?

    1. Hi Bruna, and welcome!!! Really happy you’re hear, and grateful that you took a moment to be so uplifting. Thank you so much <3.

  5. Only just come across your blog- absolutely in love with it!

    I’m going to have a go at making these this weekend- Could I ask roughly what sort of weight you would use for the main clay block (Black) per coaster? I’ve bought some FIMO 56g blocks of clay- do you think using 1 block per coaster would be roughly right?

    Thank you!

  6. Great do it yourself project. When I first saw the post I thought those were actual black marble pieces of hexagon tile. In short, you can actually buy these black hexagon, marble tiles that come attached to a mesh backing. Search google for them. They’re readily available for this awesome DIY project.

  7. Hey there! So I just took my coasters out of the oven (they look fantastic this DIY is amazing!) and they seem hard but like I could still bend them a teensy bit ? Sometimes my oven doesn’t totally hit the temperature it’s set to hit so should I put them in the oven a bit longer or do you think they’ll harden more once they’ve totally cooled (they’re still warm but not so warm that I can’t hold them)? Thank you!

    1. Hi Casper! They should harden more once they’ve completely cooled. Sometimes though I’ve had it where there’s still a little give in the clay after it has cooled, which means it wasn’t in the oven long enough but it’s never bothered me enough to where I put it back in. I’m so glad they turn out beautiful for you!

  8. Love this idea! Do you think If I were to make, I could make whit marble by doing the same steps just opposite coloring?

Leave a Reply

Your email address will not be published. Required fields are marked *